Alliance iS HPLC Systems Site Preparation Guide

Power outlet requirements

Topic LCI-SPG-0002, Last Updated 11/08/2024

The system is shipped with the power cords requested at the point of order. The customer is responsible for ensuring that their power outlets are compatible with the power cords shipped with the product. The power cord sets must comply with local regulations. To ensure electrical safety, use only the power cord set included with your Waters product. Do not use the Waters-provided power cord for any other products. The power cord set is defined as the cable with plugs at both ends.

Note: If you want to install ancillary equipment (for example, compressors), you may need additional power outlets, possibly requiring 3-phase supplies. You must confirm such supplemental needs with the local Waters agent prior to the start of the installation.

To help determine the receptacles required for the components in your system, refer to the following table.

Table 1. Regional power cords supplied by Waters
Region	Power connection (IEC 60320 C19 [16A rating])
US/Canada	NEMA 5-15P
Australia	15A
Brazil	16A
China	16A
Denmark	DK 2-1a; 13A
Europe	CEE 7/VII "Schuko"; 16A
India	16A
Japan	PSE approved JIS C 8303 15A 3 prong type B plug
Korea	CEE 7/VII "Schuko"; 16A
Switzerland	Type 23; 16A
Taiwan	5-15; 15A
UK	13A

Need Help? Connect with a Waters expert.

Create Support Request

To avoid risk of personal injury and to prevent damage to laboratory equipment, always operate your Waters products in accordance with the applicable operational and safety information, your organization’s standard operating procedures, and local regulations.

Get Help from Waters

Get Help from Waters

Power outlet requirements