Print Print
Alliance iS HPLC Systems Site Preparation Guide
Contents Contents
Alliance iS HPLC Systems Site Preparation Guide
Download PDF Download PDF

Power requirements

Power requirements
Topic LCI-SPG-0029, Last Updated 11/08/2024

Your laboratory must meet the following power requirements before you can schedule your system installation.

Warning: Main power supply voltage fluctuations must not exceed ±10%.

The data system typically requires two power sockets located adjacent to the system PC and monitor. You may require further outlets for optional equipment, such as a printer.

The system requires one power socket. Do not position the equipment in such a way that it is difficult to disconnect the power cord.

Waters recommends installing the system so that the supply cannot be inadvertently switched off.

Related topic:

Contents

Need Help? Connect with a Waters expert. 

Create Support Request

To avoid risk of personal injury and to prevent damage to laboratory equipment, always operate your Waters products in accordance with the applicable operational and safety information, your organization’s standard operating procedures, and local regulations.

Back To Top Back To Top